Real Fyre 24-Inch Live Oak Vented Gas Log Set, Natural Gas, Match-Lit with Burner, Grate & Gas Connection Kit, 90,000 BTU

Bring the authentic look of seasoned Live Oak to your hearth with this Real Fyre 24-inch vented gas log kit. The hand‑painted refractory ceramic logs are internally reinforced with steel rods to resist warping and deliver lasting strength and radiant heat. This natural gas, match‑lit set includes the vented burner, grate, silica sand, glowing embers, damper clamp, and a gas line connection kit—everything you need to complete a standard vented installation in a wood‑burning fireplace. Engineered for robust performance, the 24-inch Real Fyre vented set delivers up to 90,000 BTU for tall, lively flames and room‑warming comfort. Actual results depend on fireplace size, venting, and home conditions. Before ordering, confirm your fireplace can accommodate a 24-inch vented set. Typical minimum opening for match‑lit 24-inch systems using a Real Fyre G45 burner is about 28 inches wide (front) x 23 inches wide (rear) x 13 inches deep x 17 inches high. If you add a safety pilot, plan for additional width. This kit is designed for indoor, fully vented, wood‑burning fireplaces and operates on natural gas only. Keep the chimney flue open during use and follow local codes and the fireplace manufacturer’s guidelines. Prefer push‑button lighting or remote control? You can upgrade later: add the Real Fyre SPK‑26 manual safety pilot for easier lighting, or the APK‑17 low‑profile variable‑flame remote system for on/off and flame‑height control (both sold separately). Adding a valve may require a wider opening to center the set. What’s in the box: six Live Oak ceramic logs, vented burner and grate, silica sand, glowing embers, damper clamp, and a gas line connection kit. For best results, have a qualified gas professional install and test the system.

• HEAT OUTPUT: Up to 90,000 BTU for big, lively flames and strong radiant warmth in a properly vented wood‑burning fireplace.
• WHAT’S INCLUDED: Six hand‑painted ceramic logs with steel reinforcement, vented burner, grate, silica sand, glowing embers, damper clamp, and a gas line connection kit.
• NATURAL GAS: Match‑lit set for fully vented fireplaces only; not for propane or vent‑free fireboxes. Follow local codes and your fireplace manufacturer’s directions for safe installation.
• FIT GUIDANCE: Typical minimum opening for 24‑in vented, match‑lit sets is about 28 in W (front) x 23 in W (rear) x 13 in D x 17 in H; allow extra width when adding a safety pilot.
• UPGRADE READY: Add a Real Fyre SPK‑26 manual safety pilot or APK‑17 variable‑flame remote later (sold separately) for easier lighting and flame control.